旋轉閃蒸干燥機

※由于物料受到離心、剪切、碰撞、摩擦而被微粒化呈高度分散狀態及氣固間的相對速度較大，強化了傳質傳熱，使該機生產強度高。
※干燥氣體進入干燥機底部，產生強烈的旋轉氣流，對器壁上物料產生強烈的沖刷帶出作用，消除粘壁現象。
※在干燥機底部高溫區，熱敏性物料不與熱表面直接接觸，解決了熱敏性物料的焦化變色問題。
※由于干燥室內周向氣速高，物料停留時間短，達到高效、快速、小設備大生產
※干燥室內設置旋流片，以控制物料水份達到極低水平。
※干燥室上部分分散器可以控制出口物料的粒度及溫度。
※ The material is acted by centrifugal force, shearing force, impact and friction, the particle is very small and is in high degree distributing state. Meanwhile the relative speed between air and solid is big, it strengths mass and heat transmission. So it makes the machine has high output.
※ The hot air will enter into the bottom of the dryer and produce vigorous eddy airflow. it will produce strong washing out and bring out effect to material and eliminate the phenomenon of adhering wall.
※ At the area of high temperature at the bottom of dryer, thermal sensitive material does not contact with hot surface. It solves coking and discoloring problem of thermal sensitive material.
※ Because high cycle speed and short staying time of material in drying chamber, high efficiency and big production of small equipment can be got.
※ There is eddy piece in drying chamber. It can control moisture of material at lowest level.
※ The distributor at up part of drying chamber can control size and humidity of material at outlet.

★XSG　技術參數:Technical Data

型號 specification	干燥器筒體直徑（mm）Dia of dryer	主機尺寸（mm） Size of main machine	主機功率（kw） Power of main machine	處理風量（m 3 ） Volume of air	蒸發水量（kg/h） Vaporized capacity	占地平面尺寸（mm） Occupied area
XSG-2	φ 200	φ 300X2800	0.75-2.2	300-800	10-20	3500X2500
XSG-3	φ 300	φ 400X2800	1.5-3	600-1500	20-50	3800X2700
XSG-4	φ 400	φ 500X4200	3-4	1250-2500	25-70	4000X3000
XSG-5	φ 500	φ 600X3200	5.5	1500-4000	30-100	4200X3200
XSG-6	φ 600	φ 700X5300	5.5-7.5	2500-5000	40-150	4250X3250
XSG-8	φ 800	φ 900X5800	7.5	3000-8000	60-200	4500X3500
XSG-10	φ 1000	φ 1100X6200	7.5-11	5000-12500	100-300	4750X3750
XSG-12	φ 1200	φ 1300X6500	11-15	10000-20000	150-500	5000X4000
XSG-14	φ 1400	φ 1500X6700	15-18.5	14000-27000	200-600	5250X4250
XSG-16	φ 1600	φ 1700X6000	22	18700-36000	250-800	5500X4500